Ethylene/Acrylic elastomer (AEM, Vamac®)
Ethylene/Acrylic elastomer is a copolymer of ethylene and methyl acrylate plus a small amount of a cure-site monomer containing carboxyl groups. AEM is a tough, low-compression-set rubber with excellent resistance to high temperatures, hot mineral oil, fluids and weathering. The low temperature flexibility and mechanic properties are better than ACM, but it is not well resistant to low aniline oil (like ASTM No. 3 oil) and polar solvents. AEM is typically chosen for applications requiring improved performance over Nitrile rubber or Neoprene, or for the reduced cost by replacing high performance elastomers such as HNBR or FKM. It is also usually applied in automatic industry.
Cure system – Amine-Cured
compounds are Amine based vulcanization system.
Other Common Variations
• AEM has good
flexibility and good tear resistance, abrasion and compression set, and it
usually is used in shaft lip seals especially in automatic transmission fluids.
• Special VAMAC compounds can improve oil resistance but will sacrifice some low temperature properties
ASTM D 1418 Designation: AEM
ISO/DIN 1629 Designation: AEM
ASTM D2000 / SAE J 200 Codes: EE
Standard Color(s): Black
Hardness Range: 40 to 85 Shore A
Relative Cost: Medium- High
Standard High Temperature: 150°C / 300°F
Special Compound Low Temperature: -40°C / -40°F
Special Compound High Temperature: 175°C / 345°
Performs Well In...
Doesn't Perform Well In...
Vamac® is a registered trademark of DuPont Performance Polymers.